Toyota Venza: Data List / Active Test

Toyota Venza Service Manual / Theft Deterrent / Keyless Entry / Smart Key System(for Entry Function) / Data List / Active Test

DATA LIST / ACTIVE TEST

1. DATA LIST

HINT:

Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

NOTICE:

In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

(a) Connect the Techstream to the DLC3.

(b) Turn the engine switch on (IG).

(d) Enter the following menus: Body Electrical / Smart Key or Main Body / Data List.

(e) Read the Data List according to the display on the Techstream.

Smart Key (Certification ECU (Smart Key ECU Assembly))

Tester Display	Measurement Item/Range	Normal Condition	Diagnostic Note
D-Door Touch Sensor	Driver side door touch sensor / ON or OFF	ON: Sensor touched OFF: Sensor not touched	-
P-Door Touch Sensor	Front passenger side door touch sensor / ON or OFF	ON: Sensor touched OFF: Sensor not touched	-
D-Door Trigger Switch	Driver side door lock sensor / ON or OFF	ON: Sensor touched OFF: Sensor not touched	-
P-Door Trigger Switch	Front passenger side door lock sensor / ON or OFF	ON: Sensor touched OFF: Sensor not touched	-
Tr/B-Door Lock SW	Back door opener switch assembly (lock switch) / ON or OFF	ON: Back door opener switch assembly (lock switch) pushed OFF: Back door opener switch assembly (lock switch) not pushed	-
Tr/B-Door Unlock SW	Back door opener switch assembly (opener switch) / ON or OFF	ON: Back door opener switch assembly (opener switch) pushed OFF: Back door opener switch assembly (opener switch) not pushed	-
Ignition Switch	Engine switch / ON or OFF	ON: Engine switch on (IG) OFF: Engine switch off	-
Unmatched Vehicle-ID	No communication condition between vehicle and key (vehicle-ID) / Yes or No	Yes: Key ID code not matched to vehicle No: Key ID code matched to vehicle	-
No Response	No communication condition between vehicle and electrical key transmitter (response) / Yes or No	Yes: Key ID code not matched to vehicle No: Key ID code matched to vehicle	-
Unmatch Code or Form	No communication condition between vehicle and key (response code and format) / Yes or No	Yes: Key ID code not matched to vehicle No: Key ID code matched to vehicle	-
Key Low Battery	Low key battery / Yes or No	Yes: Key battery voltage low No: Key battery voltage normal	-
Power Save Cnt 10 Min	Power save counter - 10 minutes / Min: 0; Max: 255	Within range from 0 to 255	-
Power Save Cnt 5 Day	Power save counter - 5 days / Min: 0; Max: 255	Within range from 0 to 255	-
Power Save Cnt 14 Day	Power save counter - 14 days / Min: 0; Max: 255	Within range from 0 to 255	-
ACC Switch	Engine switch / ON or OFF	ON: Engine switch on (ACC) OFF: Engine switch off	-
ID Code Difference(Resp)	No communication condition between vehicle and key (ID code) / Yes or No	Yes: Key ID code not matched to vehicle No: Key ID code matched to vehicle	-
C Code Difference	No communication condition between vehicle and key (challenge code) / Yes or No	Yes: Key ID code not matched to vehicle No: Key ID code matched to vehicle	-
Auto Entry Cancel SW	Entry function cancel / ON or OFF	Mode status displayed	-
Ignition Available Area	Ignition available area / Front or All	Customization status displayed	-
Parking Wait Time	Parking wait time / 0.5s, 1.5s, 2.5s or 5s	Customization status displayed	-
B-Dr Opening Operation	Back door opening operation / Long, Twice, OFF	Customization status displayed	-
Key Low Battery Warning	Low key battery warning / ON or OFF	Customization status displayed	-

Main Body (Main Body ECU (Driver Side Junction Block Assembly))

Tester Display	Measurement Item/Range	Normal Condition	Diagnostic Note
ACC SW	Engine switch on (ACC) / ON or OFF	ON: Engine switch on (ACC) OFF: Engine switch off	-
IG SW	Engine switch on (IG) / ON or OFF	ON: Engine switch on (IG) OFF: Engine switch off	-
D Door Courtesy SW	Driver door courtesy light switch signal / ON or OFF	ON: Driver door open OFF: Driver door closed	-
P Door Courtesy SW	Front passenger side door courtesy light switch signal / ON or OFF	ON: Front passenger side door open OFF: Front passenger side door closed	-
RR Door Courtesy SW	Rear door courtesy light switch RH signal / ON or OFF	ON: Rear door RH open OFF: Rear door RH closed	-
RL Door Courtesy SW	Rear door courtesy light switch LH signal / ON or OFF	ON: Rear door LH open OFF: Rear door LH closed	-
Back Door Courtesy SW	Back door courtesy light switch signal / ON or OFF	ON: Back door open OFF: Back door closed	-
D-Door Lock Pos SW	Driver door lock position switch signal / ON or OFF	ON: Driver door unlocked OFF: Driver door locked	-
P-Door Lock Pos SW	Front passenger side door lock position switch signal / ON or OFF	ON: Front passenger side door unlocked OFF: Front passenger side door locked	-
RR-Door Lock Pos SW	Rear RH side rear door lock position switch signal / ON or OFF	ON: Rear RH side rear door unlocked OFF: Rear RH side rear door locked	-
RL-Door Lock Pos SW	Rear LH side rear door lock position switch signal / ON or OFF	ON: Rear LH side rear door unlocked OFF: Rear LH side rear door locked	-

2. ACTIVE TEST

HINT:

Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

(a) Connect the Techstream to the DLC3.

(b) Turn the engine switch on (IG).

(d) Enter the following menus: Body Electrical / Smart Key or Main Body / Active Test.

(e) Perform the Active Test according to the display on the Techstream.

Smart Key (Certification ECU (Smart Key ECU Assembly))

Tester Display	Test Part	Control Range	Diagnostic Note
Inside Luggage Tuner Power Supply ON	Door control receiver assembly	ON/OFF	-
D-Seat Outside Transmitter	Door electrical key oscillator (for driver side)	ON/OFF	-
P-Seat Outside Transmitter	Door electrical key oscillator (for front passenger side)	ON/OFF	-
Fr-Seat Inside Transmitter	Indoor electrical key oscillator (for front floor)	ON/OFF	-
Rr-Seat Inside Transmitter	Indoor electrical key oscillator (for center floor)	ON/OFF	-
Inside Trunk/Backdoor Transmitter	Indoor electrical key oscillator (for rear floor)	ON/OFF	-
Outside Trunk/Backdoor Transmitter	Outside electrical key oscillator (for rear side)	ON/OFF	-
D-Seat Select	Driver side selection	ON/OFF	-
P-Seat Select	Front passenger side selection	ON/OFF	-
Wireless Buzzer Operation	Wireless door lock buzzer	ON/OFF	-

Main Body (Main Body ECU (Driver Side Junction Block Assembly))

Tester Display	Test Part	Control Range	Diagnostic Note
Trunk and Back-door Open	Back door lock motor	ON/OFF	-

Dtc Check / Clear

DTC CHECK / CLEAR 1. CHECK DTC (a) Connect the Techstream to the DLC3. (b) Turn the engine switch on (IG). (c) Turn the Techstream on. (d) Enter the following menus: Body Electrical / Smart Key / ...

Diagnostic Trouble Code Chart

DIAGNOSTIC TROUBLE CODE CHART HINT: If a trouble code is stored during the DTC check, inspect the trouble areas listed for that code. For details of the code, refer to the "See page" bel ...

Other materials about Toyota Venza:

Removal
REMOVAL CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH side and LH side. The procedure listed below is for the LH side. PROCEDURE 1. PRECAUTION CAUTION: Be sure to read Precaution thoroughly before servicing (See page ...

Installation
INSTALLATION PROCEDURE 1. CLEAN FRONT SIDE FIX WINDOW ASSEMBLY (a) Clean the outer edges of the front side fix window assembly with a non-residue solvent. NOTICE: Do not touch the glass surface after cleaning it. Be c ...

Power Window Motor Malfunction (B2311)
DESCRIPTION The power window regulator motor is operated by the power window regulator master switch assembly or power window regulator switch assembly. The power window regulator motor assembly has motor, regulator and ECU functions. This DTC is output ...